| Info: | Slot |
| Data type: | USINT |
Description:
Runtime error in an incremental encoder with activated monitor (activation, see error number 7030). Signal A and nA must complement each other. Overlapping only occurs in the area of the switching edges. A cable disturbance is registered if the low or high level overlap for a long period of time.
Reaction:
See error number 7030.
Cause/Remedy:
Encoder is not connected.
No encoder supply or supply contains an error.
Encoder connection is interrupted or defective. See wiring guidelines error number 7030.
Signal level of the encoder does not meet the specifications of the plug-in card (check encoder data sheet).
Encoder defective.
AC123 plug-in card defective.