5110: Cam coupling aborted: Cyclic set positions missing

Data type:

Runtime error while coupling to a cyclic network position (MA1/2/3_CYCLIC_POS). Linear extrapolation occurs if a new set position is not received within the master cycle. This error is registered if this failure occurs several times consecutively.

See error number 4008.

Coupling is activated too soon, before set values are sent.
The sending of set values was not activated or the master station failed.
The master cycle is too short or the network load is too high.
Disturbance or disconnection of the network connection. See also error number 1012.